Microfine Cement Injection Grout

G-GROUT MF-8 INCEPTION.
• G- GROUT MF-8 is highly fluid,single component, cementitious grout pre packed.
• G-GROUT MF-8 powder It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks,pores and voids.
• It has much finer particle size than other hydraulically setting materials.
• It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality.
• Purpose: G- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes.
• MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with water
• Benefit: G-GROUT MF-8 can be injected with standard cement grouting equipment
• Compatible with most of the admixtures to accelerate / retard the setting time
• Supports all portions of structures
• Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen
• Non-toxic, Non-Hazards
• Eco friendly & Cost Effective

TECHNICAL SPECIFICATION
Properties – G-Grout Value
Consistency – Dry Powder
Colour – Grey

METHODS OF USES·
• Pre-process: The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
• Mixing: MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
• Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
• Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
• Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
• Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25°C, protected from heat, frost and direct sunlight.
• Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation.
• It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
• In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.