Fine Cement Injection Grouting Compound

Method of Uses:
• The substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed.
• MF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes.
• Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.
• Packaging: G-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.
• Storage: G-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.
• Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25°C, protected from heat, frost and direct sunlight.
• Safety Information: Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high concentrations of dust may cause irritation.
• It is recommended that suitable protective clothing, gloves and eye/face protection is worn.
• In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Attribute
Details

Packaging Size
25 Kg

Usage/Application
Construction

Brand
Guru

Color
Gray

Grade
MF8

Packaging Type
PP Bags

Purity
95%

Minimum Order Quantity
2000 Kg